Blog Post

The Most Trusted and Comprehensive Indoor Air Quality Certifications

The Most Trusted and Comprehensive Indoor Air Quality Certifications

Ancient, sophisticated designs for improving indoor air, such as the Roman hypocaust and Iranian wind catchers (badgir), suggest humanity has always coveted a more perfect indoor air experience. This long-held insistence on health-promoting indoor air has resulted in the concept of “indoor air quality” (IAQ) being recognized the world over as a distinct category of sustainable building design and an essential part of human health. In the modern era, the rapid proliferation of building materials containing harmful volatile organic compounds (VOCs), such as formaldehyde, went largely unchecked. Before long, a single interior space could contain twenty or more different materials, each offgassing and contributing to a toxic soup of indoor air. The result was a widespread health concern now known as "sick building syndrome." 

Consequently, an array of IAQ certifications now exists to help manufacturers, furniture designers, and construction teams better assess the air quality impacts of the materials they use in the buildings they design. These certifications actually measure any harmful volitle organic compounds (VOCs) that offgas from a material and model them for interior spaces. But which IAQ certifications are the best and why? In this article — and in no ranked order — our Indoor Air Quality team is taking a closer look at what we see as the most trusted and widely respected IAQ certification schemes.  

Intertek Clean Air Gold 

Designed for: Interior products such as furniture, adhesives, and other building materials 

Intertek’s Clean Air program is a well-known third-party certification for low-emitting products. Covering a range of interior products including furniture, adhesives, and other building materials, this certification gives manufacturers a way to show that their products meet recognized VOC emissions criteria. Certified products are tested to the applicable standards, with ongoing monitoring and annual testing used to support continued compliance.

Depending on the product type and intended use, certification may be based on California Department of Public Health (CDPH) Standard Method v1.2, often called CDPH 01350, or the ANSI/BIFMA e3 standard. Intertek also notes that Clean Air certifications are recognized within green building frameworks such as LEED and WELL. For manufacturers, Clean Air Gold can be a practical way to show that a product has been independently evaluated for low-VOC emissions and is suited for use in healthier indoor environments.

MAS Certified Green

Designed for: furniture, furnishings, and certain building products 

MAS Certified Green is a third-party, low-VOC materials certification used for furniture, furnishings, and certain building products. The program evaluates products against applicable emissions criteria drawn from standards such as BIFMA X7.1, ANSI/BIFMA e3-2024 Section 7.6.1, and the California Department of Public Health (CDPH) standard method for building products. MAS has also introduced MAS Certified Green Plus for furniture products that meet the more stringent VOC emissions requirements in ANSI/BIFMA e3-2024 Section 7.6.2, identified as the intermediate Tier 2 level.

The program is both ISO/IEC 17065-accredited as a third-party certification and ISO 17025-accredited as a lab. The certification is recognized for use within several green building and furniture sustainability frameworks, including LEED and BIFMA level. For manufacturers, that makes MAS Certified Green a straightforward way to show that a product has been independently evaluated for low chemical emissions.  

SCS Global Services Indoor Advantage / Indoor Advantage Gold

Designed for: All types of interior office, healthcare, and classroom furniture and building materials

Accredited to ISO 17065, SCS Global Services Indoor Advantage and SCS Global Services Indoor Advantage Gold are third-party certifications for low-emitting furniture and interior building materials. The programs cover products used in offices, schools, healthcare settings, and residences, including furniture, coatings, adhesives, wall coverings, flooring-related materials, ceiling tiles, and wall paneling. For furniture, products may qualify for either Indoor Advantage or Indoor Advantage Gold, while building materials are all certified to the Gold level.

Indoor Advantage Gold aligns with standards and criteria including ANSI/BIFMA M7.1, ANSI/BIFMA X7.1, ANSI/BIFMA e3-2024, and California’s CDPH 01350 emissions requirements. This certification is recognized by the U.S. Environmental Protection Agency and the U.S. General Services Administration, and can support projects pursuing rating systems such as LEED, WELL, BREEAM, and the Living Building Challenge.  

One of the most important features of these certifications is the use of independent laboratories for the testing. Multiple approved laboratories are located worldwide for manufacturers’ convenience. The benefit to the manufacturer of owning the relationship with the lab gives them flexibility in testing new formulations and being able to consult with them without interfering with the integrity of the third-party certification process. For manufacturers navigating a crowded IAQ landscape, Indoor Advantage and Indoor Advantage Gold remain established options for showing that products have been assessed for low emissions under widely recognized criteria.

UL GREENGUARD

Designed for: Furniture, building materials, electronics, among other items

UL GREENGUARD is one of the best-known certifications for low chemical emissions from interior products such as furniture, building materials, electronics, and interior finishes and is based on UL 2818. To earn the certification, products undergo emissions testing, a review of manufacturing processes, and routine follow-up testing to support ongoing compliance. For office furniture, GREENGUARD also aligns with ANSI/BIFMA X7.1 emissions requirements.

GREENGUARD Gold is the program’s more stringent tier and is commonly used for products intended for spaces where more sensitive populations may be present, including schools, healthcare environments, and homes. UL notes that GREENGUARD criteria were adopted early on by the U.S. Environmental Protection Agency and the state of Washington as purchasing specifications for certain product categories, and the certification has informed LEED low-emitting furniture credits since 2002. For many manufacturers, it remains a widely recognized way to show that an interior product has been independently evaluated for low emissions.

FloorScore®

Designed for: Interior, hard surface flooring, underlayments and adhesives

When considering overall indoor air quality, the materials beneath our feet may not always stand out, but they often represent a large relative surface area and thus must be vetted for VOCs.  

FloorScore® Certification is the most recognized indoor air quality certification standard for hard surface flooring materials, adhesives, and underlayments. Developed by SCS Global Services and the Resilient Floor Covering Institute (RFCI), a leading industry trade association of flooring manufacturers and suppliers, this certification qualifies for many green building schemes including LEED, WELL, BREEAM, CHPS, and Green Globes.

SCS Global Services serves as the exclusive certification body for FloorScore. They recognize a select network of independent, ISO-17025 accredited labs worldwide for efficient, unbiased CDPH testing and unlike other IAQ certifications FloorScore requires an initial onsite audit of the manufacturing facility.  

Assure® Certified  

Designed for: SPC and WPC rigid core vinyl flooring

Today, rigid core luxury vinyl flooring represents North America’s fastest growing segment of resilient flooring. This is largely due to product innovation and nearly two decades of rigorous testing, verification, and certification that uphold uniform quality standards and ensure continued consumer confidence, trust, and satisfaction.

While FloorScore focuses solely on low VOC emissions for indoor air quality, Assure Certified establishes a more comprehensive standard for all rigid core vinyl flooring products manufactured worldwide. The Assure® certification encompasses both WPC and SPC flooring constructions. By obtaining Assure certification, manufacturers of rigid core flooring products can provide customers with greater assurance regarding the safety and quality of these products for residential use. Certification verifies that the flooring product meets rigorous requirements related to indoor air quality, performance characteristics such as water resistance, low levels of heavy metals and ortho-phthalates and a new vertical edge strength testing requirement.  

Assure Certified builds upon the well-regarded FloorScore certification for indoor air quality and streamlines the path for products already certified under FloorScore by requiring only supplemental testing and product review for qualification.

Questions about indoor air quality certifications and standards?  

Get in touch and let us know what you’re hoping to achieve.

About the Authors

Holly Bajko

Holly Bajko is Program Manager for the Indoor Advantage program at SCS Global Services, where she has worked since 2018. With a B.S. in Environmental Science & Planning from the University of Michigan-Flint, Holly brings a background in environmental consulting and product certification to her role. She began her career conducting Phase I and Phase II Environmental Site Assessments before joining SCS Global Services as a Technical Specialist. Since then, she has progressed through the Indoor Advantage program, becoming Program Manager in July 2024. Her work focuses on indoor air quality, product emissions, and helping manufacturers navigate certification requirements.

Rob Emelander

Rob Emelander is the Operations Director for SCS Global Services’ Environmental Certification Services Division. He has worked over ten years within the Environmental Certification Services Division, learning what it takes to be a professional auditor in a variety of schemes pertaining to the built environment. He has advanced into leadership roles, gaining valuable experience in developing and managing certification programs and helping manufacturers achieve their sustainability goals. Rob holds a B.S. in Fisheries and Wildlife Management from Michigan State University. 

Author

Holly Bajko

Program Manager, Indoor Advantage
Rob Emelander
Author

Rob Emelander

Operations Director of the Environmental Certification Services (ECS) Division
616.502.6090